Originally published: November 13, 2025 | Content updated: October 29, 2026
Every CREST dive computer has a unique product serial number (S/N). It helps identify the unit, look up product information, and submit a warranty service request.
This guide shows where to find the serial number on each model and how to recognize its format.
1. How to Identify the Serial Number
Depending on the model, the serial number is laser-engraved on the side or back of the dive computer case.
First identify your model. Then use the corresponding photo below to locate the area outlined in red.
Do not confuse the serial number with the model name, NCC certification number, country-of-origin marking, or other technical information.
2. Serial Number Locations and Formats by Model
1. CR-4
The serial number is on the side of the watch case, near where the short (upper) strap attaches. View the case from the side and use the red box in the photo to find the complete laser-engraved serial number.

Serial number format:
- Classic Black: CBK followed by 8 digits
- Classic White: CWS followed by 8 digits
- Classic Silver: CCR followed by 8 digits
2. CR-5L
The serial number is near the bottom of the back of the case, close to where the strap attaches. Turn the dive computer over and use the red box in the photo to find the complete laser-engraved serial number.

Serial number format:
- Aurora Black: CRLB followed by 8 digits
- Light Wave: CRLW followed by 8 digits
- Lemon Cake: CRLY followed by 8 digits
3. CR-1
The serial number is on a flat area on the side of the watch case. First remove the dive computer from its silicone wristband. View the case from the side and use the red box in the photo to find the complete laser-engraved serial number.

Serial number format: CE1 followed by 8 digits
4. CR-F
The serial number is on the metal case back, near where the strap attaches.

Serial number format:
- White: CRFW followed by 8 digits
- Yellow: CRFY followed by 8 digits
- Pink: CRFP followed by 8 digits
5. CR-5
The serial number is near the bottom of the back of the case, close to where the strap attaches. Turn the dive computer over and use the red box in the photo to find the complete laser-engraved serial number.

Serial number format:
- Matte Black: CR5B followed by 8 digits
- Polish Silver: CR5S followed by 8 digits
- Moonlight White: CR5W followed by 8 digits
- Starlight Blue: CR5L followed by 8 digits
- Sunlight Gold: CR5G followed by 8 digits
These formats are provided for identification only. Always refer to the complete serial number laser-engraved on the product itself.
3. Tips for Reading the Serial Number
1. Check the Complete Number
Once you find the serial number, check its prefix and all eight digits that follow. Make sure no character is missing or copied incorrectly.
2. Look Closely at Similar Characters
Characters such as B and 8, O and 0, or I and 1 can be easy to confuse. Check them carefully.
3. Do Not Mistake Other Markings for the Serial Number
The case may also show a model name, NCC certification number, country-of-origin marking, or other technical information. Use the model-specific location and format in this guide to identify the serial number.
4. If the Serial Number Is Worn or Illegible
Do not guess or invent missing characters. Keep photos of the product and any related information to help with a later review.
4. Serial Numbers and Warranty Eligibility
A serial number identifies the product and helps us look up related information. It does not, by itself, establish whether the product is still under warranty.
For warranty eligibility and applicable terms, please refer to the following CREST pages:
- CREST Dive Computer Warranty & After-Sales Policy
- CREST Dive Computer Warranty & Service Policy Update
Thank you for your continued support and trust in CREST.
CREST Customer Service Team
CREST | WITH THE OCEAN

